OpenBSD 4.2-current (GENERIC.MP) #494: Sat Dec 22 00:05:34 MST 2007 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM) Duo CPU U2500 @ 1.20GHz ("GenuineIntel" 686-class) 1.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR real mem = 1063354368 (1014MB) avail mem = 1020239872 (972MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/03/07, BIOS32 rev. 0 @ 0xffa10, SMBIOS rev. 2.4 @ 0xf6fb0 (61 entries) bios0: vendor Dell Inc. version "A04" date 04/03/2007 bios0: Dell Inc. Latitude D420 acpi0 at bios0: rev 0 acpi0: tables DSDT FACP HPET APIC ASF! MCFG SLIC TCPA SSDT acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S5) USB0(S0) USB1(S0) USB2(S0) USB3(S0) EHCI(S0) AZAL(S3) PCIE(S4) RP01(S3) RP02(S4) NIC_(S5) RP04(S3) RP05(S3) RP06(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 132 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) Duo CPU U2500 @ 1.20GHz ("GenuineIntel" 686-class) 1.20 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (PCIE) acpiprt2 at acpi0: bus 11 (RP01) acpiprt3 at acpi0: bus 12 (RP02) acpiprt4 at acpi0: bus 9 (PXP0) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpicpu0 at acpi0: C3 acpicpu1 at acpi0: C3 acpitz0 at acpi0: critical temperature 107 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model "DELL JG1687" serial 849 type LION oem "Sanyo" acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpidock at acpi0 not configured bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000 cpu0: unknown Enhanced SpeedStep CPU, msr 0x0612091306000913 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1200 MHz (1004 mV): speeds: 1200, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03 agp0 at pchb0: aperture at 0xd0000000, size 0x10000000 vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 int 21 (irq 10) azalia0: codec[s]: Sigmatel STAC9200, Conexant/0x2bfa, using Sigmatel STAC9200 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 16 (irq 0) pci1 at ppb0 bus 11 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17 (irq 0) pci2 at ppb1 bus 12 wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int 17 (irq 5), MoW2, address 00:1b:77:00:04:a9 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 18 (irq 0) pci3 at ppb2 bus 9 bge0 at pci3 dev 0 function 0 "Broadcom BCM5752" rev 0x02, BCM5752 A2 (0x6002): apic 2 int 18 (irq 3), address 00:18:8b:c8:f6:2a brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 9) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 5) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 3) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 9) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 pci4 at ppb3 bus 2 cbb0 at pci4 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 2 int 19 (irq 255) "Ricoh 5C552 Firewire" rev 0x09 at pci4 dev 1 function 1 not configured sdhc0 at pci4 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 2 int 18 (irq 3) sdmmc0 at sdhc0 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 ignored (disabled) ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI iic0 at ichiic0 spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support sdmmc0: can't enable card uhub5 at uhub1 port 2 "Dell product 0xa005" rev 2.00/50.18 addr 2 uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse1 at ums0 mux 0 uhidev1 at uhub4 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard" rev 1.10/3.01 addr 2 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhub6 at uhub5 port 3 "vendor 0x0b97 product 0x7761" rev 1.10/1.10 addr 3 ugen0 at uhub6 port 2 "O2 O2Micro CCID SC Reader" rev 1.10/1.10 addr 4 softraid0 at root root on wd0a swap on wd0b dump on wd0b